Boot ID · Flag transfer

South Africa flag for your football boots

A full-colour South Africa flag transfer you press onto your boots at home in five minutes. 15 × 10 mm with rounded corners, no heat, no glue, and no sending your boots away.

From R120 · pair for both boots R200 · Pudo delivery across South Africa

South Africa flag football boot transfer

Your colours on every touch

Whether you grew up supporting Bafana Bafana or it’s where your family comes from, the South Africa flag (green, yellow, black, white, red and blue) is one of the details players order most. It sits neatly on the heel or the outside of the boot, next to your name or number, and reads clearly from the stands.

Real flag colours

Printed in full colour on clear film. Only the flag goes on the boot, with no white box around it.

Rounded so it stays put

Every flag is 15 × 10 mm with 1.2 mm rounded corners, so there’s no sharp point to catch and lift.

Any boot brand

Works on smooth leather and synthetic panels on any brand. Check yours in our compatibility guide.

Lasts the season

Wipe your boots clean as usual. Just keep them out of the washing machine.

Popular with the South Africa flag

Name + flag

Your surname in Russo One with the flag beside it, on the outside heel.

Number + flag

Shirt number on one side, flag on the other.

Both boots

Order a pair so the flag is on the left and right boot.

On in five minutes

  1. Clean the spot and let it dry.
  2. Place the transfer — the heel and smooth side panels are best.
  3. Press firmly for 10–15 seconds.
  4. Peel the clear film slowly after a minute.
  5. Play — full strength after 1–2 hours.

Questions

What size is the South Africa flag?

It prints 15 × 10 mm as standard. In the 3D studio you can set any height from 5 to 50 mm and see it on the boot at real size first.

Will it come off when I play?

Applied to a clean, smooth panel it holds for a full season of matches, rain and normal boot cleaning. Avoid knit and mesh areas.

Can I add my name next to the flag?

Yes. Add the flag, your name, number or an emoji in the 3D studio; each one is its own transfer from R120.

Other flags

See the South Africa flag on your boot

Open the 3D studio with the flag already on the boot. Move it, resize it, add your name.

Design it in 3D →

More Boot ID guides